VINCENT SV-123 Manuel D'utilisation page 26

10 11
13
10. 75Ω FM ANTENNA:
VHF antenna socket:
Connect a coaxial antenna cable here for FM
radio reception. If there is no antenna wall
socket, a room antenna or the wire antenna
supplied can be used.
11. LOOP ANTENNA:
Socket for the loop antenna
Connect the loop antenna supplied or an
outside antenna here if you require medium
wave reception.
12. SPEAKER:
Loudspeaker terminals
Output sockets with screw contacts to connect
a pair of stereo loudspeakers. Loudspeaker
cables with 4 mm banana plugs can be used.
13. INPUTS:
Terminal panel for stereo audio
signals of source equipment
Five stereo cinch input sockets for source
equipment with analogue stereo audio output.
Vincent
26
REAR VIEW:
14 15
16
14. OUTPUT "REC":
Recording output
The stereo signal emitted from this output is
identical to the input signal of the source
currently selected. If required, connect a
recording device here for example.
15. OUTPUT "PRE":
Preamplifier outputs for
stereo channels
Enables the preamplified stereo audio signal
from the source currently selected to be fed to
two additional amplifier channels.
16. Fuse holder
small, round plastic casing contains the
appliance's fuse. Take note of the safety
information regarding this.
17. Power socket
Introduce the power cable here and connect it
with the power supply.
12
17