Front View - VINCENT SV-123 Manuel D'utilisation

5
1. Display
In normal operation shows either the name of
the selected input channel or frequency and
RDS information of the radio stationed it is
tuned to. In tuner mode additional information
about the operation mode is shown.
2. INPUT:
Button to select the input channel
This is used to select the different input channels.
3. LOUD:
Loudness sound correction
Activates the loudness, which which will boost
high an low frequencies at low volume setting.
4. VOLUME: Volume control dial
This knob is used to set the overall volume of
the system and so controls the volume of the
loudspeakers, the headphones and the stereo's
pre-output "PRE".
5. POWER: Mains switch
Switches the appliance on and off.

FRONT VIEW:

1
6
2 3
7
6. Tuner control keys
Numerical keypad and other function keys for
operating the RDS tuner. See Chapter
"Operating the appliance - Tuner".
7. TREBLE:
Sound control for the high notes
Allows the sound's treble to be raised or
lowered.
8. BASS:
Sound control for the low notes
Allows the sound's bass to be raised or
lowered.
9. PHONES:
Connection socket for a set of
headphones
If required, connect a set of headphones here
using a 6.3 mm stereo jack.
Min. impedance: 32 ohms.
4
8 9
Vincent
25