Installation Instructions-6,000-12,000 Btu Models - Amana AMAP081BW Guide D'utilisation

INSTALLATION INSTRUCTIONS—6,000-12,000 BTU MODELS
Prepare Air Conditioner for Installation
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
1.
Unpack the Air Conditioner
Remove Packaging Materials:
Handle the air conditioner gently while unpacking the unit.
■
Place the air conditioner on a hard, flat surface.
■
Remove tape and glue residue from surfaces before turning
■
on the air conditioner. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with a damp cloth
and dry.
Do not use sharp instruments, rubbing alcohol, flammable
■
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your air conditioner.
Remove any packaging materials inserted into the side
■
louvers.
Dispose of/recycle packaging materials in an appropriate way.
■
2.
Install top channel
Place the top channel on the top of the air conditioner, lining up
the holes in the top channel with the holes in the top of the air
conditioner.
3.
Attach screws
Using four 3/8" screws, attach the top channel to the air
conditioner.
7