6. Fasten the padded band to the baby carrier
through the buckles located at the ends of the
padded band (diag. 6). Check that the buckles are
fastened correctly.
7. Adjust their length, as well as the length of the
side adjusters, ensuring that baby is sitting in a
comfortable and safe position (diag. 7). It is also
necessary to adjust the width around baby's waist
and leg openings. Ensure that the baby carrier is
neither too large nor too tight, and that it fi ts ba-
by's body correctly (see paragraphs 17 and 18).
WARNING: Ensure that the surrounding space
around baby's face is suffi cient to provide a good
quality of air circulation.
8. While supporting the Baby Carrier from the bot-
tom, adjust the length of each shoulder strap,
one at a time, until the child is closely positioned
against the upper part of the adult's thorax, so en-
suring maximum comfort for the adult and maxi-
mum safety for the child (diag. 8).
FACING FORWARD
When the child is able to keep its head straight and
its shoulders in a vertical position, approximately
from four months of age, it can be transported in a
forward facing position.
9. Place the child inside the baby carrier facing for-
ward (diag. 9).
WARNING: Hold your child safely while carrying out
this operation. Ensure that the child's legs are posi-
tioned correctly, straddling the seat.
10. Turn the padded band to 180° (diag. 10A) and
fold the upper part of the baby carrier downward
(diag. 10B).
11. Fasten the padded band to the baby carrier
through the buckles located at the ends of the
padded band (diag. 11). Check that the buckles
are fastened correctly.
12. Adjust their length, as well as the length of the
side width adjusters, ensuring that baby is sitting
in a comfortable and safe position (diag. 12). It is
also necessary to adjust the width around baby's
waist and leg openings. Ensure that the baby
carrier is neither too large nor too tight, and that
it fi ts baby's body correctly (see paragraphs 17
and 18).
WARNING: Ensure that the surrounding space
around baby's face is suffi cient to provide a good
quality of air circulation.
13. While supporting the Baby Carrier from the bot-
tom, adjust the length of each shoulder strap,
one at a time, until the child is closely positioned
against the upper part of the adult's thorax, so
ensuring maximum comfort for the adult and
maximum safety for the child (diag. 13).
HOW TO REMOVE THE CHILD FROM THE BABY
CARRIER
It is recommended that you remove the child from
the Baby Carrier while sitting.
14. Hold the child safely and unfasten the buckles
located on both sides of the padded band (diag.
14).
15. Remove the child from the baby carrier (diag.
15).
BIB
The baby carrier has a bib that can be removed and
washed.
16. To fi t the bib inside the baby carrier, use the ap-
propriate press studs, as shown in diagram 16.
HOW TO ADJUST THE WIDTH AT THE WAIST
17. The baby carrier has two practical width adjust-
ers, located on the sides. They can be used for
adjusting the inner size of the baby carrier ac-
cording to the size of the child's body, and offer
maximum safety. The width can be adjusted by
pulling buckles A, as shown in diag. 17.
HOW TO ADJUST THE LEG OPENINGS
18. The baby carrier also has two practical width ad-
justers for adjusting the leg openings independ-
ently. They allow you to adjust the baby carrier
in the best way during the various stages of ba-
by's growth. The leg opening should be adjusted
to obtain the minimum size possible, without
being too tight or uncomfortable for baby. The
width can be adjusted by pulling buckles B, as
shown in diag. 18.
CUDDLE POCKET
19. To support baby more easily and ensure that it is
in contact with its parent, the baby carrier has a
functional pocket, located at the back (diag. 19).
WARNING: The Cuddle Pocket has been designed to
offer better support to baby. Do not use the pocket
to store objects.
FOR FURTHER INFORMATION:
Chicco UK Ltd
Prospect Close
Lowmoor Road Business Park
Kirkby in Ashfi eld
Notts NG17 7LF
Tel:01623 750870
15