ABUS Security-Center EYSEO TV7300 Instructions D'installation page 46

3. Select H/V MIRROR. You can select the following settings with the LEFT/RIGHT keys.
OFF: The picture is displayed in the original.
V: The picture is displayed inverted vertically.
H: The picture is displayed inverted horizontally.
H/V: The picture is rotated through 180°.
4. Select SYSTEM HOUR and MIN and enter the current time using the control keys.
5. Select SYSTEM TIME. You can select the following settings with the LEFT/RIGHT keys.
DISPLAY: The time is shown in the camera picture.
HIDE: The time is not shown in the camera picture, but the scheduled
day/night switchover remains active.
This submenu applies to MASK mode:
Program the camera as follows:
MASK MENU
MASK NO
COLOR TYPE
POSITION
SIZE
RETURN
1. Move the cursor to select MASK. Confirm your selection with ENTER. You can mask up to
eight different areas in the camera as private zones.
2. Move the cursor to select "MASK NO" and select a number with the LEFT/RIGHT keys.
3. Move the cursor to select "HIDE" and select ON or OFF with the LEFT/RIGHT keys.
4. Move the cursor to select "COLOR TYPE" and select one of seven colours with the
LEFT/RIGHT keys.
5. Move the cursor to select either "POSITION" or "SIZE" to change the position and size of
the masked zone and then press ENTER.
Change the setting with the UP/DOWN/LEFT/RIGHT keys. Confirm your selection with
ENTER.
46
01
HIDE
01