ABUS Security-Center EYSEO TV7300 Instructions D'installation page 37

This menu applies to NORMAL operating mode.
Program the camera as follows:
MENU
TYPE
BLC
AGC
E-ZOOM
RETURN
1. Move the cursor to select "TYPE" (type of brightness control) and change the settings with
the LEFT/RIGHT keys. You can select between six options:
AES – AUTO IRIS – ME
AES: Auto-Electronic-Shutter. Select this
setting if you use manual lenses.
Auto-Iris: Auto-Iris. Select this setting if you use auto-iris lenses.
ME: Manual Shutter. Select this setting
for pictures in which the shutter time must not be changed.
2. BLC: Move the cursor to select "BLC" (backlight compensation) and change the settings
with the LEFT/RIGHT keys. You can enable or disable backlight compensation (ON/OFF).
AES
OFF
05
3. AGC: Move the cursor to select "AGC" (automatic gain control) and change the settings
with the LEFT/RIGHT keys. The higher the value, the lighter the image in bad light
conditions, but also the greater the noise.
4. E-ZOOM: Move the cursor to select "E-ZOOM" (electronic zoom) and confirm by pressing
"ENTER". You are then in the submenu. Change the electronic zoom value with the
LEFT/RIGHT keys. If you use the camera in VdS systems, do not change the factory setting
of this function.
37