Adjusting The Focus; Camera Parameters - ABUS Security-Center EYSEO TV7300 Instructions D'installation

9.7 Adjusting the focus (FOCUS ADJ)
This function helps you to adjust the camera focus. This applies both to the setting at the lens
and the camera back-focus setting.
PLEASE ADJ FOCUS
PRESS ENTER TO EXIT
1 Move the cursor in the main menu to select FOCUS ADJ. Confirm your selection with
ENTER.
2 Adjust the lens so that the image is shown optimally. Note the remarks on selecting the
right frame section on page 5 of these instructions.
3. To exit this menu, press ENTER.

9.8 Camera parameters

Here you can make general settings such as video signal synchronisation, automatic lens control,
time and display functions. The settings are as follows:
.
RETURN
1. Move the cursor to select MISC. Confirm your selection with ENTER.
2. From the submenu, select EXT SYNC. You can select the following settings with the
LEFT/RIGHT keys.
INT:
LINE LOCK:
Note: This function works in the 230V AC version only.
45
MISC MENU
EXT SYNC INT
AUTO IRIS DC LENS
H/V MIRROR OFF
MASK
SYSTEM HOUR : 17
MIN: 00
SYSTEM TIME : DISPLAY
Internal synchronisation with 50Hz
The video picture is synchronised with the voltage supply frequency.