ABUS Security-Center EYSEO TV7300 Instructions D'installation page 44

This submenu applies to SCHEDULE mode:
Program the camera as follows:
SCHEDULE MENU
D N TIME HOUR: 00
MIN:
N D TIME HOUR: 00
MIN:
CHOICE D/N TYPE
RETURN
1. Using the control keys, select a time at which the camera is to change from day to night
mode.
2. In the same way, set a time for changing from night to day mode.
3. Select CHOICE D/N TYPE and press ENTER to put the camera into operating mode so that
you can change this to the currently selected operating mode.
Note: If you set identical times for the two switchover times, the camera automatically
adds one minute to the night/day switchover time.
00
00
This submenu applies to EXTERNAL mode:
Program the camera as follows:
EXTERNAL D N MENU
INPUT SIGNAL
RETURN
1. Select INPUT SIGNAL and then, with the LEFT/RIGHT keys, select between signal types HI
and LOW:
HI = The camera switches from day to night mode if it receives a +5V signal at the
input. When this signal is no longer detected, the camera changes back to day mode.
LOW = The camera switches from day to night mode if it receives a 0V signal at the
input. As soon as the camera receives a +5V signal, the camera changes back to day
mode.
Note: These settings do not apply until you quit this program menu.
44
HI