Suggest For Installation; Important - Urmet 1033/392 Manuel D'installation Et D'utilisation

•
For proper installation of the product it's necessary to remove all possible obstacles between the
transmitter and receiver (trees, grass, etc..), use for the installation immovable poles or walls firmly
anchored to the ground.
•
You should also always use cables with screen for alarm connections, proper sizing (0.22 mm
2
distance, 0.5 mm
•
To avoid interfering with the performance and the degree of protection (IP) of the barrier is necessary to
take the necessary precaution, taking care not to alter seals, plastic and mechanical parts of the
product, using original accessories.
•
In case of repairs covered by warranty (2 years) but with obvious signs of improper installation, the
company reserves the right to decide on any repair costs.

IMPORTANT

Avoid installing the receivers beams in a position where direct sunlight, at the same
angle as the receivers beams, can enter directly into optics especially at sunset and sunrise
Remove all
obstructions (trees,
clothes lines, etc.)
between
Transmitter and
Receiver.
DS1033-135A

2. SUGGEST FOR INSTALLATION

for long distance) by taking more precautions due to electronic devices.
Avoid strong light from the
sun, headlights and direct
shining on the Transmitter /
Receiver. When strong light
stays in optical axis for
a long time, it will hurt the
product's life.
D o not install the unit on
places where it may be
splashed by dirty water or
direct sea spray.
2
for short
Do not install the
unit on the unsteady
place
17