Basic Installation Of The Device; Connection Of The Video Outputs For The Local Display - Urmet NVR Boost 2.0 Série Guide Rapide

3

BASIC INSTALLATION OF THE DEVICE

In order to obtain a quick installation, follow the indicated steps:
3.1

CONNECTION OF THE VIDEO OUTPUTS FOR THE LOCAL DISPLAY

Ref. 1093/908H and Ref. 1093/932H
Ref. 1093/908HP and Ref. 1093/916HP
Ref. 1093/932HP
Before installing the NVR, check that IP cameras are properly working and connected (via cable) to the same network as
the NVR. For IP cameras network connection and installation, see the instructions provided with IP cameras.
For NVR Installation follow these step:
Connect the mouse to the USB port ①.
Connect the HDMI Output ② or VGA Output ③ to the monitor used for the configuration of the IP cameras.
Connect the network cable to the port ④.
Only for HP Series: Connect one or more IP PoE Cameras with straight Cut. 5 cable to one or more ports ⑦
Switch on the device inserting the power connectors inside the plugs ⑤ and position the switches ⑥ on position 1.
Insert the Default Password "00000000" for OSD Menu Login and go to next chapter in order to add and configure
IP Cameras.
NOTE
For more detailed information about the devices, refer to the full instruction manual inside the CD provided with the
product.
DS1093-133B
4
4
7
7
3
2
3
2
3
1
4
2
36
6
1
5
6
1
5
6
5