Publicité
Les langues disponibles
Les langues disponibles
THE MODEL
This detailed replica features:
- weather-resistant construction
- seven-pole Bühler motor
- propeller power
- four power pickups
- length: 210 mm (8.3 in)
- weight: 670 g (1.5 lb)
THE PROGRAM
With this model, we recommend
the following items:
21010 Christmas Handcar
21680 Christmas Railtruck
33075 Christmas Passenger Car,
2001
72554 Christmas Freight Starter
Set, 110 Volt
72534 Christmas Passenger
Starter Set, 110 Volt
For information on the complete
LGB program, see the LGB cata-
log.
OPERATION
Propeller-driven railcars are fun
because of their unique operating
characteristics. For example:
- When you turn the speed con-
trol, the railcar will not move
immediately. It takes time for the
thrust of the propeller to build.
- Once the railcar starts to move,
it will accelerate quickly. The
thrust needed to overcome iner-
tia is much greater than the
thrust needed to maintain a con-
stant speed.
- When you return the speed con-
trol to stop ("0"), the railcar will
keep moving. To stop the railcar,
create reverse thrust by revers-
ing the speed control.
Attention! Excessive speed in
curves may cause derailments.
Remove any object that could be
damaged from any potential
derailment area.
Attention! This model does not
have bumpers or couplers. It can
be damaged by towing or hitting
other LGB trains.
Hint: The plow on this model is
decorative. It cannot be used to
plow snow.
Multi-Train System
This model is not designed for
4
installation of a Multi-Train Sys-
tem decoder. To use this model on
a Multi-Train System layout, con-
tact an LGB service station (see
Authorized Service).
Power Supply
Attention! For safety and reliabil-
ity, operate this model with LGB
power supplies (transformers,
power packs and controls) only.
The use of non-LGB power sup-
plies will void your warranty.
Use this model with LGB power
supplies with an output of at
least 1 amp. For more informa-
tion on LGB power supplies for
indoor, outdoor and multi-train
operation, see the LGB catalog.
Attention! After extended opera-
tion, this model may leave carbon
dust or other debris around the
track. This dust and debris can
stain carpet and other materials.
Consider this when setting up
your layout. Ernst Paul Lehmann
Patentwerk and LGB of America
are not liable for any damages.
SERVICE
Do-It-Yourself Service Levels
Level
- Beginner
Level
- Intermediate
Level
- Advanced
Attention! Improper service will
void your warranty. For quality
service, contact your authorized
retailer or an LGB factory service
station (see Authorized Service).
Hint: Additional expert instruc-
tions for many LGB products are
available at www.lgb.com.
Lubrication
The axle bearings should be lubri-
cated occasionally with a small
amount of LGB Maintenance Oil
(50019) (Fig. 1).
Cleaning
This model can be cleaned exter-
nally using a dry brush. Do not
use liquid cleaning agents.
Replacing the wheel sets
- Unplug the power pick-ups from
the wheelsets.
- Use a rod, like a nail, to push the
axles from one side out of the
Publicité
