Roller Grill GARDEN GRILL 130 Notice D'installation page 13

5. FUNCTIONING / MANIPULATION
a) Installation / assembly:
- Unpack carefully the device of its packaging.
- Place the electric grill on a solid, plane and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible materials
even if it is very well isolated.
- A distance of minimum 10 cm with the partition or the wall is necessary.
- Place the product to enable easy access to the plug.
b) First starting:
Place the lava rocks in the container, around the heating element. They have to be dis-
tributed evenly. Place the grid above.
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the values
indicated on the descriptive plate.
- Make sure that every control knob is positioned on 0.
- Check that neither the cord nor the plug are damaged
- Unwind completely the electric power cable and connect it in a plug connected with
the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly on
the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Command/display
Energy regulator (n°3 on
picture)
Green pilot light (n°1 on
picture)
Orange pilot light (n°2 on
picture)
Putting on
- Insert the control unit.
- Place the lava rocks evenly in the container, around the heating element.
- Place the grid above.
Function
Temperature setting
Machine is on (pilot light on)
Machine is off (pilot light off)
Warming up period
13