Model Designation; Specifications; Plug Configurations - Hatco Toast Qwik TQ-10 Série Manuel D'installation Et D'utilisation

Grille-pain à convoyeur
Masquer les pouces Voir aussi pour Toast Qwik TQ-10 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MODEL DESCRIPTION
TQ-1800BA Model
The TQ-1800BA model allows for quick single-sided toasting of
sliced bagels or bun products up to 44 mm (1-3/4") thick and
346 mm (13-5/8") wide. Most products can be toasted in as little
as 15 seconds. Toasts cut side facing up.

MODEL DESIGNATION

Toast Qwik
Model Number

SPECIFICATIONS

Plug Configurations

Units are supplied from the factory with an electrical cord and
plug installed (plugs are supplied according to the applications).
Some international units may require field installation of the
proper plug.
ELECTRIC SHOCK HAZARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage,
size, and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install proper voltage and size electrical receptacle.
NOTE: Receptacle not supplied by Hatco.
T Q - x x x x H B A
WARNING
TQ-1800HBA Model
The TQ-1800HBA model is designed to provide the flexibility and
performance to toast one side of sliced bagels or bun products
in as little as 15 seconds. Toasts cut side facing up. Maximum
product size allowed is 70 mm (2-3/4") thick and 346 mm
(13-5/8") wide when 3 products are placed side by side.
BA = Toasts one side only
(Buns/Bagels)
No Character = Toasts both sides
H = Opening height is 76 mm (3")
No Character = Opening height is
JIS C 8303
15 A, 250 V
CEE 17
Plug Configurations
6
44 mm (1-3/4")
CEE 7/7 Schuko
BS-1363
AS 3112
Form No. TQ2CEM1-1120

Publicité

Table des Matières
loading

Table des Matières