Sony HDR-CX550 Mode D'emploi page 56


After the operation is completed,
touch [END]  [YES] on the
camcorder screen.
 Disconnect the USB cable.
Creating a standard definition
image quality (STD) disc with a
recorder, etc.
You can dub images played back on your
camcorder on a disc or video cassette,
by connecting your camcorder to a disc
recorder, a Sony DVD writer, etc., other
than DVDirect Express, with the A/V
connecting cable. Connect the device in
either way of  or . Refer also to the
instruction manuals supplied with the
devices to be connected.

Notes
Connect your camcorder to the wall outlet (wall

socket) using the supplied AC Adaptor for this
operation (p. 17).
Sony DVD writer may not be available in some

countries/regions.
High definition image quality (HD) movies

will be dubbed with standard definition image
quality (STD).
 A/V connecting cable (supplied)
Connect the A/V connecting cable to the
input jack of another device.
 A/V connecting cable with S VIDEO
(sold separately)
When connecting to another device
via the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO cable
(sold separately), higher quality images can
be produced than with an A/V connecting
US

cable. Connect the white and red plug
(left/right audio) and the S VIDEO plug
(S VIDEO channel) of the A/V connecting
cable with an S VIDEO cable. If you
connect the S VIDEO plug only, you will
hear no sound. The yellow plug (video)
connection is not necessary.
Input
AUDIO
(Yellow)
Signal flow

Insert the recording media in the
recording device.
If your recording device has an input

selector, set it to the input mode.
A/V Remote Connector
S VIDEO
VIDEO
(Yellow)
(White)
(Red)