Sony HDR-CX550 Mode D'emploi page 40


Turn on your camcorder, then
connect the camcorder to the
computer using the supplied USB
cable.
The [USB SELECT] screen appears on
the camcorder screen automatically.

Touch the one of the media types
displayed on the camcorder
screen to make the computer
recognize your camcorder.
HDR-CX550/CX550V : [
CONNECT] (internal memory)
HDR-XR550/XR550V: [
CONNECT] (internal hard disk)
The displayed recording media differ

depending on the model.
If the [USB SELECT] screen does not

appear, touch
others]  [USB CONNECT] (under
[OTHERS] category).

Click [Continue] on the computer
screen.
 Follow the on-screen instructions
to install the software.
Connect the camcorder to the computer

during the installation of "PMB. "
Depending on the computer, you may

need to install third party software. If
the installation screen appears, follow
US
0
USB
USB
(MENU)  [Show
the instructions to install the required
software.
Restart the computer if required to

complete the installation.
When the installation is completed,
following icons will appear.
Remove the CD-ROM from your
computer.
: Starts "PMB. "
: Displays "PMB Help. "
: Displays "PMB Launcher. "
"PMB Launcher" enables you to start
"PMB" or other software, or to open
web sites.
Other icons may appear.

No icon may appear depending on the

installation procedure.

Notes
To create discs or use other functions on

Windows XP, Image Mastering API v2.0 for
Windows XP should be installed. If Image
Mastering API v2.0 for Windows XP has not
been installed yet, select it from required
programs on the installation screen and install
it following the procedures displayed. (The
computer must be connected to the internet
for the installation.) You may install Image
Mastering API v2.0 for Windows XP in
response to the message displayed when you try
to start those functions.