Ferplast cayman 40 open Manuel D'utilisation page 12

IT
CAYMAN 40 OPEN • ARCLIGHT LED • BLUCOMPACT 01 CAYMAN 40 OPEN • ARCLIGHT LED • BLUCOMPACT 01
GB
ARCLIGHT LED
Technical features
FR
Bracket
The ARCLIGHT LED overtank lamp must be fixed to the glass
wall of the aquarium by means of the adjustable bracket.
D
The glass can vary from 4 mm to 12 mm thickness (fig. 3).
Fully adjustable and flexible supporting arm (360°) (fig. 4).
Lamp
NL
28 High bright LED for deep water penetration.
Low power consumption (6W), security low tension working
ES 7,6V. (100-240V/7, adaptor included).
Dimmer switch to controlo brightness. The lamp cannot be
changed. If it runs out, the whole product must be replaced.
SK
The lamp must never be submerged.
BLUCOMPACT 01
CS
Installation and operation
Attach the filter to the desired position in the aquarium
HU
using the suckers provided. The water jet should be about
1-2 cm below the surface of the water. This will create
good surface movement which ensures the best gaseous
SV
exchange. It will also create a slight circular current which
ensures an optimum flow of water in the aquarium and
DA
simplifies the removal of dirt particles.
Make sure that the filter BLUCOMPACT is always submerged.
RU
Adjusting the direction of the flow
The special adjustable direction jet at the filter outlet can
reproduce a flow of water similar to that found in your
PL
fishes' natural environment. To change the direction of the
water, simply rotate it with your fingers.
BLUCOMPACT care and maintenance
Important! Always disconnect the appliance from the power
supply before removing the filter from the water or carrying
out any maintenance work.
Over time, the filtration material in the filter becomes
blocked, reducing the flow of water. Regular cleaning and/
or replacement of the filter cartridge is necessary to ensure
that the filter operates at peak performance.
Cleaning the filter cartridge
Remove the filter from the aquarium. Open the filter as
shown in the picture. Remove the filter cartridge. The filter
cartridge made of special sponge material must be rinsed at
least every 2-3 weeks. (fig. 5)
Replacing the filter cartridge
To ensure its effectiveness, the cartridge should be replaced
regularly or, in any case, at least every 2-3 months.
The replacement filtering element is available at leading
retailers.
If necessary, the sponge filter cartridge may be replaced
with different types of filter material. An active carbon
filter, available as an accessory, will eliminate aromatic
and coloured compounds along with medical treatment
residues.
Cleaning the rotor
Thanks to its innovative conception, the rotor does not