Attachment Of The Display - Gazelle innergy Manuel De L'utilisateur

Attachment of the display

The supplied loose display (see above) can easily be
attached to the display holder. The display holder is
located on the left-hand side of your handlebars.
Note: The display itself does not contain a battery. As
soon as you take the display out of the holder, it will
not show any information.
• T ake the display between your thumb and index
finger. (Photo 19)
• F irst click the right side of the display into the
holder and then push down the left side. (Photo 20)
• I f the display is attached correctly and the battery
has been slid into the bike properly (don't forget
to activate the battery from the standby setting by
pressing the button on the rear light), the display
shows speed, battery capacity and total number of
kilometres. (photo 21)
• I f this is not the case, then check to see if the
display and/or battery are properly attached to the
bike.
The display
18
19
20
21
71