Storch SSF 1200 Mode D'emploi page 58

Maintenance and cleaning of the grinding and remediation milling cutter
WARNING: To reduce the risk of injury from unexpected starting or
electrical shock, unplug the power cord before working on the ma-
chine.
Keep the machine clean. Regularly free it from milling and grinding
dust and clean through the ventilation opening using with compressed
Caution!
air. Remove accumulated dust from working parts. Make sure that
the machine operates properly. Periodically check screws and bolts for tightness.
Machine storage
IMPORTANT: In case the grinding and remediation milling cutter should not be
used, it must NOT be put down on its extractor hood or in erect position on the
motor cover (s. illustration)
Wiring diagram
L2
L1
AC
Translation of the original instruction
230 V
BROWN
BLUE
58
MOTOR
SWITCH
CARBON
BRUSH
CARBON
BRUSH