ROBBE S28865 Notice De Montage Et De Mise En Œuvre page 4

Preparing the model
Fig. 8 - Charging the flight battery
Safety notes:
Fig. 9 - Main rotor blades, blade tracking
Blade tracking adjustment:
Fig. 10 - Training landing gear
Spirit Fun PLUS RTF
Fig. 11 - Centre of Gravity
Flying the model for the first time
Charge the flight battery and the transmitter battery before fly-
ing the model.
Move switch 2 to the "NOR" position - this is marked on the
transmitter.
Preparing for the first flight
Fig. 12 - Trimming the model, in our example using Mode 1
Roll (movement around the longitudinal axis)
Pitch (movement around the lateral axis - elevator)
Throttle trim
Yaw (movement around the model's vertical axis)