ROBBE S28865 Notice De Montage Et De Mise En Œuvre page 3

Transmitter stick mode
Stick assignment, mode 1
Stick assignment, mode 2
Fig. 3 - Display and adjustment facilities in "H" mode (model
type: normal helicopter)
- Normal mode:
- Heading-hold mode:
Note:
Spirit Fun PLUS RTF
Operating the transmitter for the first time
Fig. 4 - Inserting the dry / rechargeable cells in the trans-
mitter
Note regarding battery charging: maximum permissible
charge current: 1 A.
The transmitter is fitted with a polarity-protection diode,
which prevents a short-circuit if the banana plugs on the
charge leads should touch.
Using a reflex charger with the polarity-protection diode in
place will cause the automatic charge cut-off circuit to mal-
function, and the transmitter battery will be overcharged.
Notes regarding dry cells:
Fig. 5 - Operating display
Figs. 6 and 7 - Changing crystals
Replacement crystals for the transmitter and receiver are
available from your nearest robbe Service Centre.