Basic Sewing (1); Basic Sewing; Pin Feeding (For Hard-To-Handle Fabrics); Pin Feeding Mechanism - Brother 884-639 Manuel D'instructions

Basic Sewing (1)

Basic Sewing

Before
sewing.
Lift foot, pull about 15 cm
1
of upper and bobbin thread
under and behind foot, and
position fabric under foot.

Pin Feeding (for hard-to-handle fabrics)

Fabric:
Velvet
Quilt
Synthetic
Suede
Knit
Coating
Others
The fabrics shown Move feed
✽
1
above can be joined
adjustment knob to
evenly by activating the
pin feeding position.
pin feed mechanism.
CAUTION
While the presser foot lever is lowered, the feed pin appears up through the feed dog. Keep your fingers away from the feed pin.
18
Begin
sewing.
Lower presser foot lever to
✽
2
lower foot.
Turn the hand wheel toward
3
you to lower the needle
through the fabric, then step
gently on the foot controller
to begin.
Indicator Needle
Adjust pressure adjustment
2
dial until indicator needle is
in the right position in the
matching color coded area.
Finish
Backstitches
sewing.
1 cm
1 cm
At the beginning and end Raise needle to highest position.
4
of a seam, press down the Lift foot, remove fabric and cut thread.
5
reverse stitch lever and When using thread trimmer:
✽
backstitch about 1 cm. 4 Push thread trimmer button (this will
cause the upper and bobbin threads
to be cut automatically and the
needle to stop in a raised position).
5 Lift presser foot and remove fabric.

Pin Feeding Mechanism

Feed Pin
Gently pull thread until The feed pin passes up through all layers of fabric moving with the feed dog's
3
motion to feed all layers of the fabric evenly.
feed pin catches fabric
and sew.
For safety, the feed pin is automatically lowered when presser foot is raised.
✽
� When changing sewing directions.
Make sure needle is pierced
1
all the way through fabric.
Lift presser foot, and turn
2
fabric using needle as an
axis.
Lower presser foot and
3
continue sewing.
Fabric
Feed Pin
Feed Dog