Before You Begin (2); Thread Cutter Button; Needle Stop Position Button; Light Switch - Brother 884-639 Manuel D'instructions

Before You Begin (2)

Thread Cutter Button

CAUTION
When the machine stops due to
jammed threads and so forth, do
not step on the foot controller,
turn the power off, and moving
the needle with the hand wheel,
check the situation.
The thread cutter trims upper and
●
bobbin threads at the end of seams.

Needle Stop Position Button

When indicator lamp is lit up, the
●
machine will stop sewing with the
needle lowered through the fabric.
When indicator lamp is off, the
●
needle position when sewing
stops, will be random.
If the safety mechanism is activated,
●
for example if the thread becomes
tangled, the red lamp flashes.

Light Switch

Push light switch to turn the light
●
over the sewing area on and off.
Thread Cutter Button
Press with the presser lever down.
✽
Indicator Lamp
Needle Stop Position Button
Light Switch

Feed Dog Adjustment Knob

Height of feed dogs can be
●
adjusted to coincide with fabric
weights.
Foot Pressure and Feed Dog Position
(Feed Dogs Down)
(Pin Feeding)
Lightweight Fabrics
Middleweight Fabrics
Heavyweight Fabrics
Select one of four feed dog positions according to your needs.
Note
If a setting other than is selected, the pin feed mechanism will not
operate.
Feed Dog Adjustment Knob
Velvet
9