Function; Operation - Berker KNX Touch Control Mode D'emploi Et Instructions De Montage

z
(2)
(5)
(3)
(4)
Figure 2: Side/rear view
(2) USB connection – only for programming in the factory
(3) Slot for micro SD card
(4) Jack for binary contacts or external temperature sensor -
(5) Programming button and programming LED
(6) KNX bus connection terminal
(7) Connecting terminal for auxiliary voltage - DC 24 V +/-10% SELV
Scope of delivery
- Display
- Supporting ring for installation on a wall box
- pre-assembled cable on a plug for
sleeves for the connection of external devices
- 4 Sticker for documentation of the physical address data

3 Function

System information
This device is a product of KNX system and corresponds to the KNX guide-
lines. Detailed specialised knowledge obtained from KNX training courses is
required for understanding. The planning, installation and commissioning are
carried out with the help of KNX-certified software.
system link start-up
The function of the device is software-dependent. The software is to be taken
from the product database. You can find the latest version of the product
database, technical descriptions as well as conversion and additional support
programmes on our website.
24
(6)
(7)
with conductor
Correct use
- Operating panel for switching functions, blind control, temperature and cli-
mate control
- Display/presentation of measured values
- Activation of alarm systems and display of security-related status
- Display device for texts, graphics, photos
- The device is only suitable for indoor areas
- Installation into wall box according to DIN 49073
Product characteristics
- high-resolution, touch-sensitive display
- up to 10 freely configurable pages for operating elements and displays
- integrated icon library for icons, self-generated icons importable with micro
SD card
- up to 16 scenes configurable
- Timer functions
- Automatic functions for ventilation (window, ventilation units) and climate
control (heating, cooling), blind (blinds, shutters, awnings) and light control
- Password protection per page
- internal proximity sensor for automatic activation of the display from stand-
by mode
- integrated brightness sensor for automatic adjustment of the display
lighting
- Connection for external temperature sensor (see accessories) and binary
contacts

4 Operation

Display elements and operating concept
P
All display graphics are displayed in negative representation to reduce them
to the most essential. In true representation, the backgrounds in the display
are dark and the fonts/icons are white/light grey.
The complete display area is touch-sensitive. The device has a display page
for standby operation in which time and date are displayed in the delivered
state (Figure 3).
z
25