Berker KNX Touch Control Mode D'emploi Et Instructions De Montage page 17

z
Using individual pictures/graphics
A large library of graphics is available at the factory for designing operating
and display pages for applications in light, blind and HVAC control technology
as well as multimedia and safety technology, which is stored in the device.
Additionally, you can load your own graphics for icons or control knobs, pic-
tures or picture sequences into the device. These have to be saved on a micro
SD card at the topmost level in a defined resolution and specific file format.
When doing so, it is essential to use the predefined folder names (Table 3).
Moreover, the image files must be named with a 4-digit numerical sequence -
(0001 ... 9999) - in order to be retrievable in the ETS or in the display menu.
Pictures/graphics for: Resolution
Slideshow as screen- 320 x 240 px
saver
Single picture display as 320 x 240 px
screensaver
Still picture display 320 x 240 px
1)
small icon
1)
Control knob 158 x 158 px
1)
only configurable over the ETS, not directly selectable on the screen
1)
Table 3: My pictures/graphics on micro SD card
The device is connected, but not yet mounted, so that the slot for Micro SD
Card (3) is accessible. The system has not yet started up. Pictures/graphics
are stored on a micro SD card.
P
If the system already started up before inserting the micro SD card, in
menu -
Insert micro SD card into the slot (3) until it snaps into place. When doing so,
„
make sure that the contacts of the card are facing up towards the display.
Switch on auxiliary voltage.
„
The device starts up.
System Einstellungen System
In the display menu, an individual screen saver can be set with image data
Sprache der Sprache Sprache der
editierbaren Texte System editierbaren Texte
from the Micro SD Card.
System Einstellungen System
With enter menu
„
Sprache der Sprache Sprache der
editierbaren Texte Tastenton Bildschirm System editierbaren Texte Tastenton
The display changes to the menu
With / scroll in the bottom display row (10) to the setting parameter
„
Tastenton Bildschirm Tastenton
and select.
With / select e.g.
„
32
File format
jpg (RGB colour
space)
jpg (RGB colour
space)
jpg (RGB colour
space)
48 x 48 px png
png
execute a . The device is restarted.
, and then select
.
.
Sprache Sprache der
System editierbaren Texte
Einstellungen System Wecker Einstellungen System
Wecker
Bildschirm Tastenton
Weckzeit
With
„
–
With
„
07 : 45
P
Intrinsic icons for control surfaces are to be deposited on the memory card
under image number 0250 ... 9999 and can be allocated in the ETS.
P
The configuration of images for permanent displays such as for a greeting
screen is done in the ETS. With a still image display, the touch-sensitive
display is locked for the length of the display.
P
The micro SD card must remain in the device while being used as My
Pictures/Graphics.
Folder name
Cleaning display
diashow
The device has a special cleaning function to prevent any unintended functions
from being activated when removing dirt or fingerprints etc. While the cleaning
diafix
function is active, nothing is evaluated while the display surface is touched.
Press control surface
„
Mo. 30.06.14 07:22
festbilder
The display changes to the menu
Select submenu
„
icons
icons The cleaning icon displays the locking of the touch-sensitive display.
Touches are not evaluated – in the delivered state 5 minutes – for the
configured period. The remaining cleaning time is displayed on the screen
as a countdown (Figure 8).
Clean the display surface with a lint-free cloth. Moisten the cleaning cloth
„
slightly with clear water if necessary.
Seite 5 Seite 6
After the countdown has finished, the display returns to the screensaver/
start page. The device can be operated again.
P
Do not use any sharp-edged implements for cleaning.
P
Do not use any aggressive detergents, acids or organic solvents.
P
Do not allow any moisture to get into the device.
.
Wecker
Wecker
EIN
EIN
Weckzeit
change to selection of the
– + +
/ set the of an image stored on the SD card.
07 : 45
in the top display row (8).
(Figure 8).
Seite 7
Settings
System
Cleaning mode
Figure 8: Cleaning mode
z
.
.
00:00:42
33