Berker KNX Touch Control Mode D'emploi Et Instructions De Montage page 14

z
P
After connecting to the auxiliary voltage, the displays of the time and date
are not current. A clock is required in the KNX installation for displaying the
correct data.
Figure 3: Standby display/screensaver
The display area is divided on the operating and display pages.
The top row of the display (8) is already preconfigured and at the first menu
level next to basic data such as weekday, date and current time, displays the
control surface for
07:22
you where you are currently located in the menu.
System Einstellungen System
The bottom row of the display (10) has a total of 10 evenly divided control sur-
Sprache Sprache der Sprache Sprache der
System faces. From here, at the first menu level, individual, freely configurable pages editierbaren Texte System editierbaren Texte
can be opened, or at subsequent menu levels, defined standard functions can
be triggered. The control surfaces for selecting pages are empty and can be
Bildschirm Tastenton Bildschirm Tastenton
filled individually with text. For navigating within a menu level, two additional
functions / are available.
Between these two rows is the display and operating area (9) that can be free-
ly configured using the ETS.
Seite 6 Seite 7
Mon 30/06/14
Figure 4: Layout of the display area
(8) top display row for basic displays and device settings
(9) Display and operating area – freely programmable
(10) bottom display row for page selection and defined default functions
26
07:18
Monday 30 June 2014
. On the following menu levels, this line shows
(8)
07:22
(9)
(10)
Page 5 Page 6 Page 7
Triggering a function, operating loads
Consumers, such as lighting, blinds, etc., are operated using the touch-sensi-
tive control surfaces, and are dependent on the device programming.
P
Each touch on the touch-sensitive surface can be confirmed by an acous-
tic signal when the button sound
If the device is in standby mode, touch anywhere on the touch-sensitive
„
display area (1).
The last page/start page used is displayed.
P
If the proximity sensor in the menu
the display switches automatically to the last page/start page used upon
approaching.
Press a control surface in the display and functional area (9).
„
The stored function is executed.
P
The actuation pulse lasts for the duration of the actuation. Depending
on the function, short and long touches can trigger different actions, e.g.
switching/dimming or roller shutter/blind.
P
If no action is executed on the display within an adjustable time period, the
device returns automatically to standby display/to the screensaver – if this
is activated.
Setting device
Einstellungen System Einstellungen System
Sprache Sprache der Sprache
Press control surface
„
Mo. 30.06.14 07:22
System editierbaren Texte System
The display changes to the menu
Bildschirm Tastenton Bildschirm
Select submenu
„
With / go to the next/previous page, on which up to 4 setting parameters
„
Einstellungen System
each can be selected.
Einstellungen System Wecker Einstellungen System Wecker
Press control surface for the parameter required.
Sprache „ Sprache der
Wecker
Wecker
System editierbaren Texte
EIN
The display changes to another page where you must select once again,
Weckzeit Weckzeit
or it changes directly to the setting of the parameter (Figure 5).
Seite 5 Seite 6 Seite 7
– – +
With / decrease/increase the parameter value, with
„
07 : 45
07 : 45
Bildschirm Tastenton
preset value (Figure 5) or with
ter (Table 1).
With confirm the entry.
„
The display returns to the previous menu level.
is switched on.
ON
-
Sprache der
in the top display row (8).
editierbaren Texte
.
Tastenton
.
Einstellungen System
Sprache Sprache der
System editierbaren Texte
EIN
Bildschirm Tastenton
+
ON / OFF activate/deactivate the parame-
z
is activated,
Einstellungen System
Sprache Sprache der
System editierbaren Texte
Bildschirm Tastenton
/ scroll to a
27