Bresser Zoomar Mono 8-25x25 Mode D'emploi page 16

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Zoom setting
After you have sharply set the image in the smallest level
of magnification, you can further increase the magnifica-
tion as much as you want. Turn the zoom setting (4) to-
wards the right until you reach the desired magnification.
Adjust the sharpness of the image by slowly turning the
focus setting (6).
i
Note:
In the close-focus range, the magnification
setting is not recommended over 8 times out. The visual
field would be thus greatly reduced that a focus would no
longer be given on the observation object.
NOTES on Cleaning
Clean the eyepieces and/or lenses only with a soft, lint-
free cloth, (e.g. microfibre cloth). To avoid scratching the
lenses, use only gentle pressure with the cleaning cloth. To
remove more stubborn dirt, moisten the cleaning cloth with
an eyeglass-cleaning solution and wipe the lenses gently.
Protect the device from dust and moisture.
High humidity can cause the (acrylic) glass to fog up. This
is not a defect! In this case let the device acclimatise for
- 16 -

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

16-62525

Table des Matières