Bresser Zoomar Mono 8-25x25 Mode D'emploi page 15

2.1 Conventional focus setting
Set the lowest magnification (8x) on the zoom scale (5)
using the zoom setting (4). Turn the focus setting (6) till
the calibration mark ∞ on the scale for the object distance
(7) is detected. Look through the eyepiece (2) at a distant
object (e.g. a church spire). Set the sharpness of the image
by further turning the focus setting (6) to the right or left.
2.2 Focus setting in close focus range
(less than half a meter away)
For observation distances of under a half meter (macro
setting or near focus) initially proceed as described in
Section 2.1. Subsequently, slowly extract the refocusing
(8) until you get a sharp image.
i
Note:
The visual field is only very small in the close-
focus range. Therefore, a pinpoint focusing is required.
- 15 -
DE
GB
FR
ES