Pump Maintenance - Petsafe Drinkwell Platinum D2-CA-17 Manuel D'utilisation

13. If you have trouble reaching certain spots or hard-to-reach corners, try using a cotton
swab or purchase the Drinkwell
Cleaning Kit, visit our website at www.petsafe.net to locate a retailer near you or to
find a listing of Customer Care Centre telephone numbers for your area.

Pump Maintenance

Important: Cleaning the Pump is essential to the longevity of the Pet Fountain, as well
as the cleanliness of the water. Clean the Pump every two weeks. Warranty may be
voided if the Pump's motor is not cleaned regularly.
Pump
1. Remove the Pre-Filter and Housing from the Bowl.
2. Remove the Pump from the Pet Fountain as explained in the "Pet Fountain Disassembly
and Cleaning" section.
3. Once the Pump is out of the Pet Fountain, with your thumb and forefinger, gently
squeeze on either side of the Faceplate, and pull it off. It may be necessary to insert a
fingernail into the seam of the Faceplate to pry it off (Fig. 13 & 14).
4. Next, remove the Intake Plate by placing your fingernail underneath the small lip
located on the narrow side of the teardrop-shaped Intake Plate Pull-Tab and pull it
out (Fig. 15 & 16).
Intake Plate
Pull-Tab
10
Cleaning Kit, a 3-piece Brush Kit. To purchase a
®
Impeller Intake Plate
Fig. 13
Fig. 15
www.petsafe.net
Faceplate with
Flow Control Knob
Fig. 14
Fig. 16