Using With Carrying System - Stihl BGA 100 Notice D'emploi

Masquer les pouces Voir aussi pour BGA 100:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 45
English
2
► Adjust the strap (1) so that the carabiner (2) is about a
hand's width below your right hip.
7.2

Using with Carrying System

7.2.1
Fitting and Adjusting the Connecting Cable
The connecting cable can be fitted and adjusted to suit the
user's size and the application.
1
2
The connecting cable can be fitted through the following
openings:
– the upper left opening (1)
– the upper right opening (2)
– the lower left opening (3)
– the lower right opening (4)
32
1
3
4
1
2
5
6
► If the connecting cable is fitted through the upper left
opening (1) or the upper right opening (2):
► Open the press studs (5).
► Lay the connecting cable over the shoulder strap (6).
► Close the press studs (5).
► If the connecting cable is fitted through the lower left
opening (3) or the lower right opening (4): Seal the
opening you use (3 or 4) with the hook and loop fastener
(7).
► Arrange the connecting cable so that it is as short as
possible without hindering your work.
7.2.2
Fitting and Adjusting the Carrying System
► Put the battery on your back.
► Close buckle (2) on the waist belt.
► Close buckle (1) on the chest strap.
7 Adjusting Blower for User
3
4
7
1
0458-711-9621-A

Publicité

Table des Matières
loading

Table des Matières