Menu Settings - Siemens TE803 Série Mode D'emploi

en Menu settings

Menu settings

j
■ Hold down the button 7 for at least
3 seconds.
The different setting options are now
d isplayed.
Settings
Coffee temp.
Hot water temp.
Exit profile
The different setting options can be selected
with the selection buttons
Note: The changes you have made are
saved automatically. It is not necessary
to confirm them additionally. If no entry is
made after approx. 2 minutes, the menu will
close automatically.
The following settings can be selected:
Language
■ Turn the rotary knob 6 to select the
required language.
Coffee temp.
■ Turn the rotary knob 6 to set the c offee
temperature. The setting applies to
all types of preparation, except the
c ustomised settings under "Customising".
Hot water temp.
■ Turn the rotary knob 6 to set the
t emperature. The setting applies to
all types of preparation except the
c ustomised settings under "Customising".
Exit profile
■ Here you can set whether the appliance
should exit the customising function
automatically
automatic
.
manually
12
<85°C
< >
and 4.
or manually
Auto off after
■ Turn the rotary knob 6 to enter the time
span after which the appliance should
automatically switch off following the last
drink preparation.
A time between 5 minutes and 8 hours can
be set.
Cup warm. off in
(depending on the model)
Here you can set the time span after which
the cup warmer 27 switches off again
automatically.
■ Set the required time by turning the rotary
knob 6.
Contrast
The display 5 contrast can be set from
to . The factory setting is
+10
■ Turn the rotary knob 6 to select the
required setting.
Water hardness
■ Turn the rotary knob 6 to select the
required water hardness
Info: It is important to set the water
hardness correctly, so that the appliance
indicates accurately when the descaling
programme should be run. The factory
setting for the water hardness is
water softener is installed in the house,
please set the water hardness to level
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
■ Dip the test strip briefly in water and
check the result after one minute.
Level Water hardness
German (°dH) French (°fH)
1 1-7
2 8-14
3 15-21
4 22-30
–10
.
+0
or .
1, 2, 3 4
. If a
4
.
3
1-13
14-25
26-38
39-54