Freund Seaming Pro Mode D'emploi page 44

EN USER MANUAL
4. After using the Seaming Pro in rain or high
humidity, the forming rollers and drive
rollers should be detached from the ma-
chine and dried and the axles lubricated
before the machine is stored in the case.
5. If the machine is not used or for a longer
period of time or stored in the PVC case
the tension lever is to be released (open)
to release the pressure on the disk springs.
6. We recommend an annual basic cleaning
and lubrication of the Seaming Pro. It is
recommended to have the service carried
out by freund.
Subject to technical changes. Please observe the safety instructions.
45
WWW.FREUND-CIE.COM