Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN USER MANUAL
9. DRAWINGS PRESSURE ADJUSTMENT
9.1 Seaming pressure setting
Seaming is performed at a higher pressure than
cutting. The pressure is set correctly when the
tension lever can be closed with slight pressure.
The pressure can also be adjusted during seaming
without removing the unit from the seam.
1.
Pressure Adjustment Screw
(hexagon socket)
2.
Disc springs
3.
Pressue spring
Subject to technical changes. Please observe the safety instructions.
33
3
WWW.FREUND-CIE.COM
Publicité
Chapitres
Table des Matières
