Consumables; Warranty; Troubleshooting; Ec Declaration Of Conformity - Dustcontrol DC 3800i Notice Originale

Consumables

Description
Hose Ø=50
HEPA filter
Fine filter, polyester with integrated filter guard
For spare parts, see the Dustcontrol

Warranty

The warranty period is two years and covers manufacturing defects. The warranty is valid on condition that the machine is used in
the normal way and receives the required service. Normal wear and tear is not covered. Repairs must be carried out by
Dustcontrol or personnnel authorized by Dustcontrol. Otherwise, the warranty is void.

Troubleshooting

Problem
Motor not running.
Motor stops immediately after
starting.
Motor runs, but no suction.
Motor runs, but poor suction.
Machine blows dust.
Abnormal sound from
machine.

EC Declaration of Conformity

We hereby declare that DC 3800i is in conformity with the following Directives and Standards: 2006/42/EC, 2014/35/EU,
2014/30/EU, EN 60204-1:2006/A1:2009, EN1822-1:A1:2009.
Dustcontrol AB
20
Part No.
2401
42024
42025
website.
Cause
Power supply not connected.
Incorrect fuse.
Suction hose not connected. Hose blocked.
Suction hose perforated.
Blocked filter.
Suction hose too long or narrow.
Hose partially blocked.
Top of machine poorly fitted.
Dust trapped in cyclone.
The pump is rotating in the wrong direction.
Filter loose or damaged.
DC 3800i, Art.nr. 94132-D
Action
Connect power supply.
Replace with correct fuse.
Connect hose. Reverse or clean hose.
Replace hose.
Clean or replace.
Replace hose.
Reverse or clean hose.
Adjust fitting.
Remove top and clean cyclone.
Let an electrician change the phase.
Check and replace as necessary.
Book service.