Consumables; Warranty; Troubleshooting - Dustcontrol DC 1800 TR EX Mode D'emploi

Consumables

1800TR/2800TR
Plastic bag, ESD
Fine filter, polyester antistatic
HEPA filter
Suction hose 38, ESD-Certified
Coupling socket 50/38 ESD-Certified
Connecting sleeve 38/38 turnable ESD-Certified
Floor Nozzle 370 A-38 ESD-Certified
DC 3800 TR S EX
Plastic bag, standard antistatic, ESD
Fine filter, antistatic
HEPA filter
DC 1800/2800 TR EX, 3800 TR S EX can be ordered with antistatic accessories to meet the requirements of ATEX Zone 22
Directive 2014/34/EU.
For spare parts, see the Dustcontrol

Warranty

The warranty period is two years and covers manufacturing defects. The warranty is valid on condition that the machine is used in
the normal way and receives the required service. Normal wear and tear is not covered. Repairs must be carried out by
Dustcontrol or personnnel authorized by Dustcontrol. Otherwise, the warranty is void.

Troubleshooting

Problem
The drive unit does not
suck or does not suck
enough.
The drive unit runs, but no
suction.
The drive unit runs, but
poor suction.
Machine blows dust.
Abnormal sound from
machine.
Part No.
42384
42028-01
42027
2027
2108E
2114E
7235E
Part No.
42112
4202501
42024
website.
Cause
Compressed air not connected or poor
main pressure.
Suction hose not connected.
Hose blocked.
No plastic bag in cyclone.
Suction hose perforated.
Blocked filter.
Suction hose too long or narrow.
Hose partially blocked.
Top of machine poorly fitted.
Dust trapped in cyclone.
Filter loose or damaged.
DC 1800/2800/3800, Art.nr. 94170-C
Solution
Check the compressed air pressure at the
machine during operation. Pressure should
be at least 6 bar.
Connect hose.
Reverse or clean hose.
Insert a plastic bag.
Replace hose.
Clean or replace.
Replace hose.
Reverse or clean hose.
Adjust fitting.
Remove top and clean cyclone.
Check and replace as necessary.
Book service.
19