Description Of The Device; Features - Futurelight PHS-750E Mode D'emploi

Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly
fastened.
The lamp must never be ignited if the objective-lens or any housing-cover is open, as discharge lamps may
explose and emit a high ultraviolet radiation, which may cause burns.
The maximum ambient temperature T = 45° C must never be exceeded.
a
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.

DESCRIPTION OF THE DEVICE

Features

Multi-function Moving-head
• With electronic ballast
• Colour-wheel with 8 different, dichroic colour-filtres and white
• CMY colour mixture for indefinite colour variations
• Switchable colour change (mode 1: only full colours, mode 2: colour-change at every position)
• Rainbow-effect with adjustable speed in both directions
• Slot-in system for exchanging gobos and colour-filtres without tools
• Two gobo-wheels with 6 rotating gobos plus open each
• All gobos can be interchanged
• With gobo-shake function
• Preprogrammed prism-gobo-macros
• 3-facet prism
• Stepless frost-filter for fading the projections in or out
• Animation-wheel for fire-effect
• Motorized focus
• Mechanic dimmer
• Steplessly adjustable iris
• Lightbeam with 15°-30° radiation angle
• Coloured LCD-display
• Strobe-effect with 1-13 flashes per second via shutter
• Random strobe-effect
• Exact positioning via 16 bit Pan/Tilt movement resolution
• PAN-angle switchable between 630° and 540°
• Control-Board with LCD-display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-
Reverse, Program, Reset, lamp on/off, operating hours
• DMX-controlled operation or stand alone operation with Master/Slave-function
• 56 preprogrammed scenes in Program Run for stand alone operation
• Number of scenes in Program Run can be changed individually
• The scenes in Program Run can be modified via the Control Board or via an external controller and loaded
into the memory
• 7 built-in programs can be called up via DMX-controller
• Sound-controlled via built-in microphone
• For MSR 700SA/DE GOLD lamp
• DMX-control via every standard DMX-controller
38/120 00024321.DOC, Version 1.4