Description Of The Device; Features - Futurelight PCC-575 CMY Mode D'emploi

Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.

DESCRIPTION OF THE DEVICE

Features

Powerful Colour-changer with CMY-colour mixture
• CMY colour mixture
• Colour-wheel with additional 4 discrete dichroic filters plus open, 3200 K and 5600 K correction-filters, UV-
filter
• Macro-function for combinations between CMY-colour mixture and colour-wheel
• Frost-filter for softer beam
• Beam-shape effect: wide and flat beam can steplessly be rotated by 180°
• Strobe-effect of 1-13 flash per sec.
• Remotely switching of the lamp
• Built-in demo sequence
• Remote reset function
• Motorized zoom (19-27°)
• For MSR 575/2 GX-9.5 lamp
• DMX-control via every standard DMX-controller
• DMX-controlled operation or stand alone operation with Master/Slave-function
• 48 preprogrammed scenes in Program Run for stand alone operation
• Number of scenes in Program Run can be changed individually
• The scenes in Program Run can be modified via the Control Board or via an external controller and loaded
into the memory
• 8 built-in programs can be called up via DMX-controller
• Sound-controlled via built-in microphone
• Control-Board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, Program,
Reset, lamp on/off
31/99 51840965_V_1_0.DOC