Description Of The Device; Features - Futurelight PHW-710 Pro-Head-Wash Mode D'emploi

The lamp must never be ignited if the objective-lens or any housing-cover is open, as discharge lamps may
explose and emit a high ultraviolet radiation, which may cause burns.
The maximum ambient temperature T = 45° C must never be exceeded.
a
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.

DESCRIPTION OF THE DEVICE

Features

Multi-function Washlight
• DMX-controlled operation or stand alone operation with Master/Slave-function
• 48 preprogrammed scenes in Program Run for stand alone operation
• Number of scenes in Program Run can be changed individually
• The scenes in Program Run can be modified via the Control Board or via an external controller and loaded
into the memory
• 8 built-in programs can be called up via DMX-controller
• Sound-controlled via built-in microphone
• CMY colour mixture for indefinite colour variations
• Colour-wheel with additional 4 discrete dichroic filters plus white, 3200 K and 5600 K correction-filters, UV-
filter
• Switchable colour change (mode 1: only full colours, mode 2: colour-change at every position)
• Rainbow-effect with adjustable speed in both directions
• Macro-function for combinations between CMY-colour mixture and colour-wheel
• Frost-filter for softer beam
• Beam-shape effect: wide and flat beam can steplessly be rotated by 180°
• Strobe-effect of 1-10 flash per sec.
• Control-Board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-
Reverse, Program, Reset, lamp on/off, operating hours
• Remotely switching of the lamp
• Built-in demo sequence
• Preprogrammed variable/random strobe and dimmer pulse effects
• Black-out while Head moving or colour changing
• Remotely controllable speed of PAN /TILT movement for easy programming (vector mode)
• Remote reset function
• Motorized zoom
• Mechanic dimmer
• Exact positioning via 16 bit Pan/Tilt movement resolution
• For MSR 700 G-22 lamp
• DMX-control via every standard DMX-controller
32/103 00025949.DOC, Version 1.4