Installation And Setup; To Insert And Remove The Battery - Petsafe PBC19-11794 Manuel D'utilisation

Installation and Setup

The PetSafe Outdoor Bark Control should be placed facing the dog and within range of the
®
dog. The unit is designed with provisions for hanging or mounting and should be positioned
at a height of no more than 1.5 metres. The Outdoor Bark Control can also stand alone. It
can be placed in a tree, hanging from a pole, on a fence post, etc. For best results, the area
between the Outdoor Bark Control and the dog should be free of any large obstacles.
__________________________________________________________

To Insert and Remove the Battery

1. The PetSafe Outdoor Bark Control utilizes a replaceable 9-volt battery (not included).
The battery door is located on the back of the unit. Lift the battery door open.
2. Insert the 9-volt battery with the positive side oriented as shown.
3. Replace the battery door by positioning the top edge, and snap the bottom of battery door
into place.
Lift Battery Door
www.petsafe.net
Replace
Battery Door
Top End First
5