OBJ_BUCH-1573-009.book Page 41 Tuesday, April 26, 2016 3:20 PM
Select the mowing day with the up/down cursors, e. g. "M".
Set up a start time slot for the selected day with the right/left
cursors.
Confirm the start time by pressing the bottom right arrow. Set
up an end time for the slot with the right/left cursors. Confirm
the end time by pressing the bottom right arrow.
The machine will work within a slot unless the battery needs
charging. If the lawn area has been completed before the end
of a time slot the machine will return to the docking station.
The programmed slot is shown on a schedule.
Edit Slots
00 04 08 12 16 20
l
M
T
l
W
T
Set up all additionally required mowing days and confirm your
personal "CUSTOM 1" mowing schedule by pressing the bot-
tom left arrow (return).
To delete a slot move the cursor to the corresponding time
and press the bin icon which will appear in the bottom right
corner.
Select Daily Timer
MANUAL
Info
CUSTOM 1
CUSTOM 2
CUSTOM 3
Edit
CUSTOM 4
CUSTOM 5
Back
A tick
will appear next to the saved mode.
The machine will start mowing as soon as day and start time of
slot 1 is reached.
Note: Set up different schedules for seasonal growing condi-
tions in spring, summer and autumn. Observe the growth of
the grass and adjust your schedule if required.
Bosch Power Tools
Mowing
Do not let children ride the machine.
Press manual stop button before lifting. Always lift the
machine at its handle.
Height of cut: The height of cut for the Indego can be adjusted
between 20 mm and 60 mm (see figure 19). The height of cut
dial offers 10 separate settings (approx. 20 mm, 24 mm,
29 mm, 33 mm, 38 mm, 42 mm, 47 mm, 51 mm, 56 mm and
60 mm).
Note: The Indego's cutting system is designed to cut small
lengths of grass (3–5 mm) so that the clippings can mulch
down and fertilise the lawn.
Note: For the first 3 weeks of usage set the height of cut be-
l
tween 5 and MAX to prevent the perimeter wire being cut. Af-
ter 3 weeks the wire will be covered by the lawn.
For best mowing results, set up a frequent mowing schedule
for longer lasting battery and for preventing debris on the
lawn.
Once mowing has started:
21:00
– in the "Manual" mode, the machine operates until the
lawn area has been cut or until the manual stop button is
pressed. It only pauses mowing for charging.
– in the programmable "Custom" mode, the machine oper-
ates continuously within a slot. It only pauses mowing for
charging. To stop mowing before the machine has finished
a slot, press the manual stop button. If the lawn area has
been completed before the end of a time slot the machine
will return to the docking station.
Logicut Intelligent Cutting
How the Indego cuts efficiently (see figure 20)
To mow efficiently the Indego learns the shape of the cutting
area it is working in. This learning occurs during the first two
cutting cycles.
Below is an explanation of how the Indego learns the lawn
shape.
How it works
To mow efficiently the Indego maps the outline of the lawn ar-
ea and the location of the objects within it (trees, flowerbeds,
Select
ponds, etc) that are marked out with perimeter wire during in-
stallation. This allows the Indego to plan where it needs to cut
the grass, where it has cut the grass and also its route to and
from the docking station. This allows the Indego to complete
the task of mowing more efficiently.
Mapping the cutting area (see figure 20)
After setup the Indego will first map out the shape of the gar-
den. This is done by following the perimeter wire placed
around the edge of the garden. Whilst following the perimeter
wire the Indego is measuring the distances. The Indego then
builds up a map of the garden that is saved into its memory.
Note: The Indego does not follow the wire to the inner bound-
aries.
English | 41
F 016 L81 517 | (26.4.16)