Cleaning The Brewing Unit (Figure G); Service Programmes - Bosch TIS65 Série Mode D'emploi

en

Service programmes

Cleaning the brewing unit
(Figure G)
F
See also the Quick reference guide in
the storage compartment 16.
In addition to the automatic cleaning
programme, the brewing unit 14 should be
removed regularly for cleaning.
■ Use the main switch J 1 to switch the
appliance completely off.
■ Open the door 13 to the brewing unit.
■ Slide the red latch 14a on the brewing
unit 14 all the way to the left.
■ Press the eject lever 15 right down. The
brewing unit will be released.
■ Take hold of the brewing unit 14 by the
recessed grips and carefully remove it.
F
Important: Clean it without using
washing-up liquid and do not put it in
the dishwasher.
■ Remove the cover 14b and thoroughly
clean the brewing unit 14 under running
water.
■ Thoroughly clean the strainer of the
brewing unit under the water jet.
18
■ Thoroughly clean the inside of the appli-
ance with a moist cloth, removing any
coffee residues.
■ Allow the brewing unit 14 and the inside
of the appliance to dry.
■ Replace the cover 14b on the brewing
unit and then push the brewing unit 14
back into the appliance until it latches into
place.
■ Press the eject lever 15 right up.
■ Slide the red latch 14a all the way to the
right and close the door 13.
Service programmes
F
See also the Quick reference guide in
the storage compartment 16.
Following prior notification, either
Descaling necessary or
Cleaning necessary or
calc'nClean necessary.
appears in display 3 at certain intervals.
The unit should immediately be cleaned or
descaled using the appropriate programme.
The two processes Descale and Clean can
optionally be carried out together using
the calc'nClean function (see the section
"calc'nClean"). Failure to carry out the
service programme according to the instruc-
tions may damage the appliance.
Using a water filter increases the intervals
until a descaling programme needs to be
performed.
F
Important: if descaling is not
performed on the appliance in good
time, then the following appears:
Descaling overdue. Appliance will soon
be locked --> press menu for 3 sec.
Immediately perform the descaling
process in accordance with the
instructions. If the appliance is
locked, it can only be operated again
once the descaling process has been
carried out.