Tipping Sunshade; Use; Spanning Sunshade - Glatz PALAZZO Royal Notice De Montage Et D'utilisation

4.2 Tipping Sunshade

• Unscrew jacking ring (3) from ground socket and fix above the hand
crank, with padding (fig. 14).
• Hold sunshade firmly in place and loosen safety screw (5) (fig. 15).
• Tip sunshade pole carefully.
• Loosen twisting mounts (7) and stow in a plastic bag in the ground
socket.
• With fixing stay (2) screw together the hinge disc and the once
again lowered jacking ring.
• Lock ground socket with lid (1).
• Store the sunshade in a place protected from dust and moisture.
Fig. 14
1 2 3
3
7
5
7
7
Fig. 15

5. USE

(In the case of sunshades with motorised drive, heating and/or
illumination, the respective instructions for installation and use are to
be followed.)

5.1 Spanning Sunshade

• Clear a space for opening.
• Remove strap.
• Spread sunshade by loosening the roof struts and material outwards
(fig. 16).
• Turn hand crank (1) clockwise until sunshade is spread out.
• Take off crank if necessary.
• It is not permitted to operate the sunshade using an electric drill:
the warranty does not cover losses!
Fig. 16
spread
1
|EN
15
• Close sunshade if there is
freshening wind.
• Unsupervised sunshades
must not be left open.