Introduction; Intended Use; Depicted Components; Package Contents - Parkside PABH 20-Li B2 Traduction Des Instructions D'origine

CORDLESS HAMMER DRILL
PABH 20-Li B2

Introduction

Congratulations on the purchase of your
new appliance. You have selected a high-
quality product. The operating instructions
are part of this product. They contain important
information about safety, usage and disposal.
Before using the product, please familiarise your-
self with all operating and safety instructions. Use
the product only as described and for the range
of applications specified. Please also pass these
operating instructions on to any future owner.

Intended use

The PABH 20-Li B2 hammer drill
(hereinafter appliance) is suitable for:
▯ Hammer-drilling into brickwork, concrete and
stone
▯ Drilling into stone, wood and metal
▯ Screwing into wood and metal
Any other usage of or modification to the appliance
is deemed to be improper and carries a significant
risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.
The appliance is not intended for commercial use.

Depicted components

SDS-plus tool holder
Dust protection cap
Locking collar
"Drill/hammer drill" switch
Rotation direction switch
On/Off switch
Battery charge level button
Battery display LED
Battery pack
Release button for the battery pack
LED work light
High-speed charger
Red charge control LED
Green charge control LED
Drill with hexagonal shank
Drill with SDS-plus fitting
│ GB │ IE
■ 16
Screwdriver bits
SDS bit adapter
Locking collar
Tool holder
Universal bit holder

Package contents

1 cordless hammer drill PABH 20-Li B2
1 high-speed charger PLG 20 A1
1 battery pack PAP 20 A1
3 x 150 mm SDS-plus drills Ø 6 / 8 / 10 mm
3 x drill bits Ø 5 / 6 / 8 mm (HSS) with hexago-
nal shanks
4 x 50 mm bits (S2): 5.5 / PH1 / PZ1 / PZ2
1 x bit extension (hexagonal shank)
1 x bit extension (SDS-plus fitting)
1 carrying case
1 set of operating instructions

Technical data

Hammer drill PABH 20-Li B2
Nominal voltage:
Idle speed:
Stroke rate:
Stroke energy:
Max. drill diameter:
Use only the following battery to operate the
cordless tool: PAP 20 A1
Type:
Rated voltage:
Capacity:
Cells:
Use only the following high-speed battery
charger to charge the cordless tool:
PLG 20 A1
INPUT:
Rated voltage:
Rated power
consumption:
Fuse (internal):
20 V (DC)
n 0–900 rpm
0
0–5000 spm
≥ 1 joule
8 mm for metal
10 mm for concrete
16 mm for wood
LITHIUM ION
20 V (DC)
2 Ah
5
230–240 V ~ , 50 Hz
(AC)
65 W
T3.15A
3.15 A
PABH 20-Li B2