Introduction & Machine Specifications - Alto CLARKE FUSION 20I Manuel D'utilisation

Introduction & Machine Specifications
Introduction & Machine Specifications
Clarke Technology's newly designed Fusion 20 I and 20 IX burnishers are efficient and superior floor
burnishing machines. The Fusion 20 uses one pad to burnish a path 20 inches wide. The powder
created by burnishing is collected by a dust control system in the pad housing.
The Fusion 20 burnishers come complete with three - 12 volt batteries, one battery charger, one pad
driver, and one operator's manual.
SPECIFICATIONS:
Model
Power Supply
Motor, Pad
Motor Traction
Drive Train
Pad
Pad Speed
Pad Pressure
Speed, Forward
Speed, Reverse
Vibration
Sound Level (dbA)
Drive Wheel
Charger
Length
Width
Height
Burnishing Swath
Polishing Rate
Weight
Shipping Weight
Battery Wt. (3-195 AH)
Base Machine
CLARKE TECHNOLOGY Operator's Manual - Fusion 20 Burnisher
Fusion 20 I (01172A) Fusion 20 IX (01171A)
36 volt 36 volt
195AH, 250AH 195AH, 250AH
2.5 hp (1.9 kW) 65 amp 2.5 hp (1.9 kW) 65 amp
.5 hp PM / .37 kW
Direct Drive, Roller Chain Direct Drive, RollerChain
20" (51cm) 20" (51cm)
2000 rpm 2000 rpm
0-30 lbs. 0-30 lbs
0 - 240 ft/min. (pad assist) 0 - 240 ft/min.
0 -170 ft/min. 0 - 170 ft/min.
<2.5 m/s 2 <2.5 m/s
68 68
1.62"x8.00" (4cmx20cm) 1.62"x8.00" (4cmx20cm)
36V, 25A, 115V/60hz 36V, 25A, 115V/60hz
53.5 inches (136cm) 53.5 inches (136cm)
22 inches (56cm) 22 inches (56cm)
42 inches (106cm) 42 inches (106cm)
20 inch (51cm)
24,000 sq. ft./hr. 24,000 sq. ft./hr.
244 lbs./ 111 kg 266 lbs./121 kg
300lbs./136 kg 300 lbs./136 kg
330 lbs./150 kg 330 lbs./150 kg
01178A 01179A
2
20 inch (51cm)
1 1