HumanTechnik Lisa RF time flash Mode D'emploi page 11

We would like to congratulate you
on the purchase of our »lisa RF time
flash« alarm clock. You have chosen
a modern and reliable system. Please
read the operating instruction careful-
ly to be able to start the unit correctly
and to familiarize yourself with all of
the system's features.
Standard components
Please check if all following compo-
nents are included:
- »lisa RF time flash«
- 12V power supply unit
- Operating instructions
- Warranty card
If any parts are missing please im-
mediately contact your dealer or the
manufacturer directly.
Functioning principle
The »lisa RF time flash« is an elec-
tronic clock with an analogue time
display and a receiver for the radio
signals from various lisa radio trans-
mitters. When a radio signal is de-
tected, you are alerted in the form of
a flashing light/acoustic alarm and 6
light-emitting diodes.
The following special accessories can
be connected to the alarm clock:
- Vibrating pillow
- Flash module
- Switch module
- Acoustic module
Startup
Plug in the power supply unit of the
»lisa RF time flash« into a 230 V pow-
er outlet and connect the cable with
the 12 V connection socket.
Time setting
Turn the button for setting the time
in the direction of the arrow until
the desired time is set.
Alarm setting
Turn the button for setting the alarm
in the direction of the arrow until
the required alarm time is set.
Switching on the alarm
Switch on the alarm using the ON/
OFF switch.
Switch not pressed: Alarm switched
on (green outline visible around
switch).
Switch pressed: alarm switched off.
Switching on the audible alarm
Switch on the audible alarm using the
audible alarm ON/OFF switch.
Switch not pressed: Audible alarm
switched on (green outline visible
around switch).
Switch pressed:
switched off.
Audible alarm
English 11