Specifications - Sharp LL-T2010W Mode D'emploi

Product specifications
LCD display
Diagonal 51cm, Advanced Super-V and Anti-
Glare Low Reflection TFT LCD module
Resolution (max.)
UXGA 1600 x 1200 pixels
Displayable colors (max.)
16.77 million colors (8 bit)
Brightness (max.)
220cd/m 2
Dot pitch
0.255(H) x 0.255(V) mm
Contrast ratio
350:1
Angle of visibility
Left-right 170°; Up-down 170°
Screen display size
Horizontal 408 mm x Vertical 306 mm
Video signal
Analog: Analog RGB (0.7Vp-p) [75Ω]
Digital: DVI standard based on 1.0
Sync signal
Separate Sync (TTL level: +/-), Sync on
Green, Composite Sync (TTL level: +/-)
Expansion compensation
Digital screening
Enlarging VGA/SVGA/XGA/SXGA etc. with a
compensation process. (no enlarging, based on a
fixed aspect ratio, and enlarging to full screen size.)
Plug & Play
VESA: DDC2B compatible
Power management
VESA: based on DPMS
DVI: based on DMPM
Input signal terminal
Analog: 15 pin mini D-sub (3 rows)
Digital / Analog: 29 pin DVI-I
USB hub function
1 upstream port, 2 downstream ports (bus-
powered hub based on USB standard Rev 1.1)
Screen tilt
Upward 0° -30°; downward 0° - 5°
Screen swivel
90° from left through right
Power supply
AC100-240V, 50/60Hz (Use special AC adapter,
type NL-A51J of Sharp Corporation.)
Temperature of operating environment
5 - 35°C
Power consumption
Maximum 52W (5.5W when in power-saving
mode) (Use special AC adapter.)
Dimensions (W x D x H)
483 mm x 218 mm x 479 mm
Weight (excluding AC adapter)
Approx. 10.5kg
Display area only, approx. 7.9kg

Specifications

Dimensions (Units: mm)
Length of analog signal cable:
Length of USB cable included:
* Length from analog signal input terminal
Special AC adapter
Digital signal cable (NL-C01E):
Analog signal cable (NL-C02E):
24
483
227
78
Approx. 1.8 m
Approx. H 140 mm x D 70 mm x H 41 mm
approx. 1.8 m*
approx. 2.0 m
Approx. 2.0 m
Approx. 2.0 m