Mixing Module; Mixing Box 2 Way With Base And Roof - S&P UTBS Série Instructions De Montage

9.8.1. MIXING MODULE

• Air 2 inlet section: Is sent with a fixed position of the dampers. If not coincide with the
needs of the installation, change the frontal panel as shown.
• Air 3 inlet section (A+B): When it is installed between two modules will have to remove
the front panels as shown. (B)
A
B
remove panel

9.8.2. MIXING BOX 2 WAY WITH BASE AND ROOF

• Damper, as standard, supplied left hand. If required right hand, installer can change
position of front panel as shown below.
remove panel
72