Assembling Units Side By Side - S&P UTBS Série Instructions De Montage

6.5.3. ASSEMBLING UNITS SIDE BY SIDE

If you have ordered equipment for side-by-side installation of a heat recovery module or
free cooling module, the equipment will be supplied with joining brackets to join the mo-
dules together. To attach these brackets, the equipment must be accessed from the inside:
- Place the bracket over the aluminium strip and tighten with the two self-drilling
screws (1))
- Insert packing strip (2)
- Join the modules together by securing the two brackets using an M8 bolt, was-
hers and a nut (3))
Example of joining modules side by side:
46