Unit Labeling; Handling - S&P UTBS Série Instructions De Montage

4. UNIT LABELING

• The unit comes with a variety of labels that must not be removed. Herewith sample la-
bels and meaning:
ICON / LABEL

5. HANDLING

• When unit received, unpack and make sure the packaging is intact; any defect may indi-
cate damage to the equipment. Review it carefully to make sure that no parts are mis-
sing.
• If there is any damage to the unit or the shipment is not complete, write down the pro-
blems on the delivery slip and send a claim to the carrier. Also report any problems to
S&P.
• The climate control unit is supplied in separate modules. Each module may be moved
to its final point of installation only in the position which will be installed, except when
expressly authorised by the manufacturer.
• Components should be transported using appropriate hoist and slings. The equipment
has corner lugs for loading and unloading.
MEANING
Signing on fan access door. Indicates
that the equipment must be disconnec-
ted, followed by a waiting period, since
there are moving parts that constitute
danger to entry.
Indicates direction of airflow in the unit.
Indicates the inlet/outlet for the cold
water heat exchanger.
Indicates the inlet/outlet for the hot
water heat exchanger.
Unit identification plate. This indicates:
- Model
- Code
- Serial number
- Date of manufacture
- Output power of installed motors (Kw)
- Maximum absorbed current of motor (A)
- Power of installed electric heater
- Electrical supply
41