Promise Technology FastTrak TX4660 Guide De Démarrage Rapide page 8

FastTrak TX4660, TX8660, TX8668 Quick Start Guide
Installation in the Host PC
The FastTrak TX4660 and TX8660 cards have internal SAS Ports and are
designed for installation in the Host PC.
To connect the FastTrak card to your Host PC:
1. Install the disk drives into the open drive bays of your system.
2. Attach a SFF-8087-to-SATA or a SFF-8087-to-SAS fanout data cable to one
of the Ports on the FastTrak card. See Figures 1 and 2.
3. Attach the SATA or SAS ends of the data cable to your SATA or SAS disk
drives.
4. Attach your system's power supply cables to the disk drives.
5. Optional. To connect your LEDs, follow one of the following diagrams:
• Individual LEDs, TX4660 and TX8660.
• Aggregated or Global Activity LEDs.
Installation in a Server
The FastTrak TX4660 and TX8660 cards have internal SAS Ports and are
designed for installation in a server.
–
+
1 2 3 4
–
+
Ports
Top View
Activity LEDs
5 6 7 8
Fault LEDs
Global LEDs
+
R
G
+
Edge View
8
Aggregate LEDs
+
–
–
+