Promise Technology FastTrak TX4660 Guide De Démarrage Rapide page 17

Browser Support
On the Host PC where you install the FastTrak card and WebPAM, you must
have one of the following browsers:
• Internet Explorer
• Mozilla
If you do not have one of the above browsers, install the browser first and make it
the default browser. Then install WebPAM.
Installation
Windows
Follow these steps to install WebPAM on your Windows-based PC or Server.
1. Boot up the PC/server and launch Windows.
If the computer is already running, exit all programs.
2. Insert the software CD into your CD-ROM drive.
3. Double-click on the Install CD's icon to open it.
4. Double-click on the Installer icon to launch it (right).
The first WebPAM installation dialog box appears.
5. Follow the prompts in the installation dialog box.
Linux
Follow these steps to install WebPAM on your Linux-based PC or Server.
1. Boot up the PC/server and launch the Linux GUI.
If the computer is already running, exit all programs.
2. Insert the software CD into your CD-ROM drive.
3. In the CD window, double-click on the webpam...bin icon to
begin installation (right).
4. When the Run or Display? dialog box appears, click Run in
Terminal.
After several moments, the Terminal window closes and the first WebPAM
PRO installation dialog box appears.
5. Follow the prompts in the installation dialog box.
• Firefox
• Netscape Navigator
17
Task 6: Installing WebPAM